Select your language
Flame has Extinguished 8 (Eight) Times
Press the Power button to clear the Error Code.
If Error happens again:
- Monitor the gas pressure to the water heater while in operation. Ensure pressure is between 3.5 and 14” WC.
- Check gas valve wire. Ensure connection is secure.
- Check flame detection sensor. Ensure connections are secure. Normal operating settings are more than 2.5DC before ignition, less than 2.5DC after ignition.
- Check vent terminations. Ensure there are no blockages.
- Assure that the flame is stable when lit.
- If the problem persists, replace the main control.
